Installation Guide for Novell NetWare Client 32 
for Windows 95
----------------------------------------

This file describes using this BETA Cogent distribution 
for using the NetWare Client 32 with Cogent ISA and EISA
Fast Ethernet adapters.

The Novell NetWare Client 32 for Windows 95 provides a
native Novell 32-bit client for use with Windows 95. This
NetWare client uses either the NDIS 3.0 driver, EMXSA.SYS,
or the NetWare server driver, EMXSA.LAN. 

For a successful installation, you need:

     1.   A PC running Windows 95
     
     2.   The Novell NetWare Client 32
          (available at
          ftp://ftp.novell.com/pub/updates/nwos/nc32w952/c3295n_1.exe)
     
     3.   This BETA distribution

Instructions below describe the installation procedure for
the EMXSA.LAN driver.

To Install and Configure the Novell NetWare Client 32 for
Windows 95
----------------------------------------
     
     1.   Download the NetWare Client 32 self-extracting
          archive, c3295n_1.exe, from Novell's FTP or
          CompuServe forum. Extract the client into an empty
          directory on your hard drive. For example, type:

          c:\>md c32
          c:\>cd c32
          c:\>c:\c32\c3295n_1

     2.   Power off your system, install your Cogent ISA or EISA
          adapter, and boot up your system.
          
     3.   After booting up Windows 95, go to the Control
          Panel and choose the Network icon.
          

     4.   Run SETUP.EXE (located in \IBM_1 of the
          c3295n_1.exe Novell archive) to install the
          NetWare Client 32 onto your Windows 95 machine.
     
     5.   After selecting "Start" from the opening screen,
          the install program copies several NetWare Client
          32 files to your system. Next, the install program
          prompts you to select a network adapter driver.
     
     6.   Choosing your network adapter driver.
     
          Select "Have Disk," and specify the path to the directory
          containing this BETA distribution. Select your Cogent 
          adapter from the list provided, and select "OK." Select 
          "OK" again to continue copying the NetWare Client 32
          installation files.
   
      7.  After you have made all desired changes, select
          OK. Windows 95 will ask if you want to restart
          your system now. Respond with No, and then shut
          down and power off your system.
     
      8.  Power up your system to allow the Cogent ISA or EISA
          Windows 95 driver to take effect.
          

