***********************************************************************

            IMPORTANT INFORMATION
                 for
   Windows 95 mach64 enhanced display driver
***********************************************************************
Windows 95 mach64 enhanced display driver                 June 23, 1995
***********************************************************************

READ THIS FILE COMPLETELY BEFORE ATTEMPTING TO USE THIS PRODUCT !

****************************

Contents

1.0     Introduction
2.0     Adapter Installation
3.0     Installation Notes for Windows 95 mach64 enhanced display driver
4.0     Features
5.0     Windows 95 mach64 enhanced display driver problems


****************************

1.0     Introduction

This file contains last-minute updates that are not found in the User's
Guide or in any addendum accompanying the display adapter.  Please read
this file before proceeding with the installation.

****************************

2.0     Adapter Installation

Refer to the User's Guide for information on adapter installation.


****************************

3.0     Installation Notes for Windows 95 mach64 enhanced display driver


The Windows 95 mach64 enhanced display driver is a Windows 95 mini driver. 
It is installed and configured using the standard Windows 95 configuration
utilities.

1) Start Windows 95.

2) Click the right mouse button in an empty area of the desktop and select the 
Properties... entry.

3) Select the Settings page of the Display Properties sheet.

4) Click the Change Display Type... button.

5) In the Adapter Type area, click the Change... button. Click the Have 
Disk... button. Insert the install disk, specify the source drive, 
and click OK. Highlight the MACXW4 entry and click OK to copy the driver 
to your hard disk.

6) If you have not already configured your monitor type do so now. In the 
Monitor Type area, click the Change... button and select the appropriate 
monitor.

7) Click "close" to return to the "Settings" page. Click "Close" or "Apply" to 
apply your changes.

8) Restart the computer to run Windows 95 using this new driver.

9) When Windows 95 is up, configure your new display in the Display Properties 
sheet as follows. Click the right mouse button in an empty area of the desktop
and select Properties... On the Settings page of the Display Properties sheet, 
choose your preferred color support, screen resolutions, and font size. Note 
that these values reflect the monitor configuration you performed in step 6
of this procedure. Click Apply to switch to the new setting.


****************************

4.0	Features

The Windows 95 mach64 enhanced display driver supports the following additional
features:

 
 - The ATI Adjustment page is added to the Display Properties sheet to
provide monitor setup and adjustment. Use this page to adjust your 
monitors refresh rate and adjust your screen size and position. To invoke 
the ATI Adjustment page click the right mouse button in an empty area of the 
desktop, select the Properties entry and select the ATI Adjustment tab.

 - The ATI Adapter Settings page is added to the Adapter Properties sheet to  
provide low level hardware configuration. To invoke the ATI Adjustment page
activate the System applet in the Control Panel, select the Device Manager tab,
double-click the Display adapters item in the list, double-click the ATI
adapter entry and select the Settings tab.            
 
 
****************************

5.0	Windows 95 mach64 enhanced display driver problems
 
 - The Windows 95 mach64 enhanced display driver is capable of using monitor
timing data contained within Windows 95. This data is selected by configuring
a monitor type at Windows 95 installation time or via the "Settings" page of
the display properties sheet. If you change the selected monitor type via the 
"Settings" page of the display properties sheet the new timing data may not 
take effect until after restarting Windows 95. A solution to this problem
is to always restart Windows 95 after changing the monitor type.

 - The Windows 95 mach64 enhanced display driver is capable of using monitor
timing data contained within Windows 95. This data is selected by configuring
a monitor type at Windows 95 installation time or via the "Settings" page of
the display properties sheet. The Windows 95 mach64 enhanced display driver 
may incorrectly interpret Windows 95 monitor timing data for some older 
monitors which require interlaced modes. This may be cause some options
to be disabled. A solution to this problem is to select one of the 
"(Standard monitor types)" available via the settings page of the display 
properties sheet.

 - In Windows 95, display drivers can be installed via the "Add New Hardware" 
wizard. When the Windows 95 mach64 enhanced display driver is installed via 
the "Add New Hardware" wizard the "Settings" page does not get installed into 
the mach64 display adapter property sheet. A solution to this problem is to 
use the driver installation procedure described above.

 - The mach64 driver included with Windows 95 (ATIM64.DRV) does not support
mach64 boards which use the IBM DAC. When ATIM64.DRV is run on a mach64
board with an IBM DAC the mouse pointer will not be visible. A solution 
to this problem is to install the Windows 95 mach64 enhanced display driver.

