         ͻ
                                                            
                    Universal 10/100VG LAN Adapter          
            (C) Copyright PDS, 1995. All Rights Reserved.   
                   Release Date : Sep 1, 1995               
                               (950901)                     
                                                            
         ͼ


INTRODUCTION
============

     This is a reference for the Universal 10/100VG User Diagnostic Program
Version 1.10 (VGDIAG.EXE v1.10).

         Five tests are available for you to test the functionality
of different parts of the network adapter. However, if any part of the
test failed, the remaining test will not be continued.
         The On Screen Diagnostic window will show you the progress of
the five test. The five test that is performed are:

     A) [Initialization]
          In this test, all registers will be tested and verified. If
     a network adapter passes this test, the diagnostic will start to
     check the cable type that is attached to the network adapter.

     B) [Cable Check]
          Check to ensure that there is a proper connection connected to
     the network adapter.

     C) [VG Hub Login]
          Start the training process and try to login to the 100VG Hub.

     D) [IRQ Test]
          This test checks the interrupt line between the
     network adapter and the system board. The test will initiate
     an interrupt through the adapter and then checks whether the interrupt
     can be received or not.

     E) [RAM Test]
          The program checks every memory module on the network
     adapter by Read-After-Write tests. These tests can verify
     the address and data paths and the memory modules
     separately. 

