
							      Oct 1995

			SN2000 Series Ethernet Card
		   Netware Server 3.12 Driver Installation
		   =======================================


The NetWare server drivers in this diskette is organized as follows:

Directory		     Contents
-----------------	     -------------------------------------------------
\SERVER\SN2000.LAN	     NetWare 3.11, 3.12 or 4.x server driver
\SERVER\NW311\*.nlm	     necessary files for Netware v3.11
\SERVER\NW312\*.nlm	     necessary files for Netware v3.12
\SERVER\NW4X\*.nlm	     necessary files for Netware v4.X

******************
*  SERVER SETUP  *
******************

NetWare 3.12 Server Installation
================================

1)  Copy the SN2000.LAN from the driver diskette "\server\SN2000.LAN"
    into the subdirectory of your server.

    >copy A:\server\SN2000.LAN	\NW312	<--- if nw312 is the server subdirectory

2)  Copy all supplied NLM and LAN files to your server directory:

    >Copy A:\NETWARE\SERVER\NW312\*.*  \NW312

3)  Run SERVER.EXE from your server

4)  Edit AUTOEXEC.NCF file

    :load install
     Select <System Option>
     Select <Edit Autoexec.NCF file>

5)  Modify the server's AUTOEXEC.NCF as following.

		  load c:\NW312\MSM.NLM
		  load c:\NW312\ETHERTSM.NLM
		  load c:\NW312\SN2000.LAN
		  bind ipx to SN2000 NET=xxxx

6)  Press <ESC> Key when edit completed
    Select <YES> to save
    Select <EXIT> to leave installation

7)  Shutdown the Server and then turn it ON again.  This time, the SN2000
    series ethernet card will be installed as your network card.
