								Oct 1995

			SN2000 Series Ethernet Card
		    Netware Server 4.x Driver Installation
		   =======================================


******************
*  SERVER SETUP  *
******************

Method 1 using install menu (for NetWare 4.1 only)
==================================================

1)  Copy the appropriate NetWare driver files (from this diskette) to the
    DOS partition of your hard disk.

    >md SN2000
    >copy A:\NETWARE\SERVER\*.*  C:\SN2000  --Insert SN2000 Driver disk in 'A'
    >copy A:\NETWARE\SERVER\NW4X\*.*  C:\SN2000

2)  Boot the Novell Server, after the server is started
    execute "LOAD INSTALL" instruction.

    : load install

3)  Select "Driver Option" and press <Enter>.

4)  Select "Configure network drivers" and press <Enter>.

5)  Select "Select a driver" and press <Enter>.

6)  Press the <Ins> key to install an unlisted driver.

7)  Press <F3> to specify a diffrent path (C:\SN2000) and press <Enter>.

8)  Select "SN2000.LAN" and copy SN2000.lan.

9)  Config adapter parameter, then Select "Save parameters and load driver".

10) Next time you start up your system, only follow steps 2 to 5 to complete
    the installation.


Method 2 modifying an Existing NetWare 4.x Server
=================================================

1)  At any workstation, Login to the Novell server as a SUPERVISOR.

2)  Copy all supplied NLM and LAN files to your server's SYSTEM directory:

    >Copy A:\NETWARE\SERVER\NW4X\*.*	F:\SYSTEM

3)  At the Novell Server side, execute load install

    :load install
	Select <System Option>
	Select <Edit AUTOEXEC.NCF>

    Modify the server's AUTOEXEC.NCF as following.

	      load SN2000.LAN
		    (msm.nlm and ethertsm.nlm will be automatically loaded
		     while loading SN2000.lan)
	      bind ipx to SN2000 NET=xxxx

4)  Shutdown the Server and then turn it ON again.  This time, the SN2000

    family ethernet card will be installed as your network card.
