
							      Oct 1995

			SN2000 Series Ethernet Card
		       Windows NT V3.1 Driver programs
		       ===============================


***********************************************
*  README for Windows NT V3.1 Installation    *
***********************************************

The SN2000 Series Ethernet Cards driver for Windows NT 3.1 is contained
in this diskette as follows:

\NT31\SN2000.SYS     : NDIS 3.0 driver for Windows NT
\NT31\DIALOG1.DLL    : Installation menu for Windows NT  ????
\NT31\OEMSETUP.INF   : OEMSETUP file for Windows NT
\DISK1

Installation Procedure:
-----------------------
(1)  In the "Main" window, Select <Control Panel> ---> <Network> --->
     <Add Adapter>

(2)  Windows NT will present a list of all available drivers.
     Select OTHERS for 3rd party adapters not in the driver list.

(3)  Windows NT will ask for the drive/path containing the SN2000 Windows
     NT drivers.  Insert the driver diskette in drive A, and then
     type the following

     A:\NT31

(4)  Windows NT will attempt to locate an OEMSETUP.INF file in the specified
     path. If you have entered the path name correctly, Windows NT should copy
     the appropriate drivers to the Windows NT system.

(5)  At this point, the drivers would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows NT installation guide for the correct procedure.

(6)  After the initial installation, the SN2000 drivers will be permanently
     copied to the Windows NT system.  Subsequent network driver lists will
     already contain the SN2000 Drivers.
