								Oct 1995

			SN2000	Series	Ethernet Card
	       Windows for Workgroups V3.11 Driver Installation
	       ================================================


**********************************************************
*  README for Windows for Workgroups V3.11 Installation  *
**********************************************************

The SN2000 Series Ethernet LAN drivers cards for Windows for Workgroups
3.11 contained in this diskette are as follows:

\WFW311\SN2000.386     NDIS 3.0 WFW driver for Windows for Workgroups
\WFW311\SN2000.DOS     NDIS 2.0 DOS driver for Windows for Workgroups
\WFW311\SN2000.COM     NetWare 3.X ODI driver for Windows for Workgroups
\WFW311\NET.CFG        NET.CFG file for Windows for Workgroups
\WFW311\OEMSETUP.INF   OEMSETUP file for Windows for Workgroups
\DISK1

Installation Procedure:

(1)  When a LAN driver is installed, Windows for Workgroups will present a list
     of all available drivers.	Since there will be no SN2000/P Family
     drivers (SN2000.386, SN2000.DOS and SN2000.COM driver programs ) initially,
     select UNLIST for 3rd party adapters not in the driver list.

(2)  Windows for Workgroups will ask for the drive/path containing the SN2000P
     Windows for Workgroups drivers.  Insert the driver diskette in drive A
     and respond with the following

     A:\WFW311

(3)  Windows for Workgroups will attempt to locate an OEMSETUP.INF file in the
     specified path. If you have entered the path name correctly, Windows
     for Workgroups should copy the appropriate drivers to the Windows for
     Workgroups system.

(4)  At this point, the driver would have been properly copied and the
     installation would proceed to the next step.  Please refer to your
     Windows for Workgroups installation guide for correct procedures.

(5)  After the initial installation, the SN2000 drivers will be permanently
     copied to the Windows for Workgroups system.  Subsequent network
     driver lists will already contain SN2000 drivers.
