;-----------------------------------------------------------------------------
; Setup messages resource file:
;-----------------------------------------------------------------------------

#0  MSG_WELCOME
Welcome to The OWL install!

You have two options for HARDWARE installation:

1) Replace your previous mouse with The OWL.
*  a. Remove your previous mouse.
*  b. Connect The OWL to a free serial port.

2) Install The OWL as a second mouse.
*  a. Keep the previous mouse in it's port.
*  b. Connect The OWL to the second free serial port.

Continue with The OWL installation?

#1  MSG_GETPATH
Install will copy The OWL software
into the following directory.

The default directory is recomended.

#2  MSG_COPYINGNOW
Install is in the process of
copying files. Please wait.

#3  MSG_SUCCESS - no autoexec and config update requested
The installation has been completed
successfully!

Press ENTER to continue.

#4  MSG_ERROR_OPEN
Can't open file
   '%s'!
#5  MSG_ERROR_CREATE
Can't create file
   '%s'!

#6  MSG_ERROR_MATCHING
Can't find file
   '%s'!

#7  MSG_ERROR_FREE_SPACE
Not enough free space on the
destination drive! Free
disk space and try to
run INSTALL again.

#8  MSG_ERROR_ALLOC
Not enough memory! Remove any
TSR programs and try to run
INSTALL again.

#9  MSG_ERROR_READ
Error during reading from the file
   '%s'!

#10 MSG_ERROR_WRITE
Error during writing to the file
   '%s'!

#11 MSG_ERROR_CREATE_DIR
Can't create directory
   '%s'!

#12 MSG_ERROR_CORRECT_CONFIG
Can't update configuration
files!

#13 MSG_ERROR_CONFIG
File SETUP.CFG has been corrupted!

#14 MSG_CHANGE_SYSTEM
Do you want install to update your
AUTOEXEC.BAT and CONFIG.SYS files
and make The OWL active in DOS?

This update is needed to run The OWL
demos and the dual mouse feature.

#15 MSG_GETCOM
Enter the number of the COM port
your OWL is plugged into.

#16 MSG_RESTART_WIN
Your computer should be rebooted now
for The OWL to be activated.

Please close any open applications and
press OK to reboot.

Press CANCEL to return to Windows.

#17 MSG_WINPARAMS
Enter the general OWL parameters.

#18 MSG_SYSTEM_CHANGED
The setup has been completed
successfully!

Your AUTOEXEC.BAT and CONFIG.SYS
files were updated. Backup versions
were created as AUTOEXEC.PGS and
CONFIG.PGS.

The OWL can be uninstalled by running
the configuration utility.

View README for further information.

#19 MSG_DUAL_MOUSE
Do you want to replace your current
mouse with The Owl, or install it as
a second mouse ?

(The second mouse option will leave your
current mouse active and allow you to
work with both mice at the same time.)

#20 MSG_DRIVER_ERROR
WARNING - Standard mouse driver not found.
If you continue installation, the DUAL mouse option
will be DISABLED.

In order to install The OWL in the DUAL mouse mode
follow the instructions below:

1) Exit installation.
2) Install your standard mouse drivers.
( use Control Panel or setup.exe under windows 3.x )
3) Verify your standard mouse works properly.
4) Rerun the installation program.

#21 MSG_SYSTEM_CHANGED_WIN
The setup has been completed
successfully!

Backup versions of your system files
were created as :

AUTOEXEC.BAT -> AUTOEXEC.PGS
CONFIG.SYS -> CONFIG.PGS
SYSTEM.INI -> SYSTEM.PGS
WIN.INI -> WIN.PGS

The OWL can be uninstalled by running
the configuration utility.

View README for further information.
