P5I430VX/280DM Explorer III AWARD P&P BIOS V1.2S note. 
This BIOS can be only used on SPEEDEASY mainboard of Explorer III.
Add the functions to support AMD K6 166MHz, 200MHz CPU and CD, LS-120 floppy 
(120MB) booting. 
New SPEEDEASY BIOS. 

How to use FLASH utility:
1. Press DEL to enter BIOS SETUP, set internal and external cache "Disabled".
2. Please press F5 to bypass config.sys and autoexec.bat when booting to DOS.
3. Run utility as follow:   
   A:> FLASH DM12S.BIN  <Enter>
4. On the utility picture, a message "Do you want to save BIOS (Y/N)" will be 
   displayed. If you want to save the BIOS on motherboard for referance, press 
   'Y'; then, utility will ask you to give path and filename for backuping ROM
   BIOS.
5. Furthmore, a message "Are you sure to program (Y/N)" will appear. To upgrade 
   BIOS, press 'Y'. After the utility finishes the upgrading procedure, turn 
   power off and on or press RESET button to reboot system.
6. For upgrade to this BIOS V1.2s, you need to enter BIOS setup again, and set
   HARD DISK MODE to "AUTO" instead of "NORMAL" in "STANDARD CMOS SETUP" menu.  
   (For some reason, this new BIOS will default "NORMAL" instead of "AUTO" when 
   upgraded from V1.xs to V1.2s).
   Or you can just clear CMOS once after reflash the BIOS.


Warning: 
   Avoid power-off incidently in upgrading procedure, or system would fail 
   to reboot!
