
FCON.EXE
This program is a DOS utility for the Powergraph 32 & Powergraph 64.  If FCON detects a Powergraph 32 PCI, it enables DAC Snoop.  If it detects a Powergraph64, options are given to enable the feature connector (the DAC Snoop bit will also be enabled for the Powergraph 64 PCI).  Note that the valid feature connector modes are VGA, 640x480 256 colors, and 800x600 256 colors.
Usage:
Powergraph 32 -
The feature connector is automatically enabled in the BIOS for the Powergraph 32.  However, for the Powergraph 32 PCI, FCON can be utilized to enable the DAC Snoop bit in the PCI configuration space.
Type "FCON" at the DOS prompt.
Powergraph 64 -
At the DOS command prompt, the user has the option to type in the following:
FCON [e|d] [s|p], 
e = Enable, d = Disable, s = Standard (Pass-through),
For example, "FCON e s" enables standard or Pass-through.
Entering FCON at the command prompt displays the following menu:
S3 Powergraph FEATURE CONNECTOR
Ver 1.0

	Enable:     (
	
	
	Disable:	    (


 TAB: (	SPACE: Select	ESC: Quit/Save
Options are provided to enable and disable the feature connector.  ESC saves the user's selections.
		
STB Powergraph Software


