	Beta Teac protected mode Windows 95 driver for Diamond MMK4000/5000
						1/23/96

**********************************************************************

	This file contains Windows 95 protected mode drivers for the
	Teac CD-55A 4x cd-rom drive for use on the OPTi 929 based sound
	card included in the Diamond Multimedia Kits 4000 and 5000.

**********************************************************************
	

INSTALLATION PROCESS

1.	It is required to obtain and install the Win95 drivers for the
	MMK4000/5000 prior to installing these drivers.  The
	file you will need is "MM929W95.EXE".  Note this filename was
	current as of this readme, but subject to change with later
	revisions.  If you cannot locate it contact Diamond Multimedia
	Systems for the current filename.  Please review the "README.TXT"
	file included with the file.  The installation steps that follow
	will assume the sound support was installed with the "OPTi929
	Sound System: Sound/Game/MKEPanasonic CD-ROM" option.

2.	Once this is done you will need to remove the previous real mode
	driver support for the Teac CD-55A cd-rom drive.  Remove the
	following lines from the,

	config.sys file:
	"DEVICE=C:\DIAMOND\CDSETUP.SYS ... "
	"DEVICE=C;\DIAMOND\TEAC_CDA.SYS ... "

	autoexec.bat file:
	" ... mscdex ... "

3.	Open Win95's Control Panel/System icon and select the Device Manager
	tab.

4.	Look for the "CD-ROM controllers" device listing.  You should have a
	listing for "MKEPanasonic...".  Double click on the device to get the
	properties.  Then select the "Driver" tab.

5.	Choose the "Change Driver..." button from this applet.  Use the "Have
	Disk" option and path to the drive and directory where you expanded
	this file.  Then select "OK".

6.	You will be presented with 3 options:

	"TEAC4x CD-ROM Drive w/16 bit Card"
	"TEAC4x CD-ROM Drive w/8 bit Card"
	"TEAC4x CD-ROM Drive w/8 bit MKE Interface Card"

	Choose the last option, ""TEAC4x CD-ROM Drive w/8 bit MKE Interface Card"
	and proceed with the install.

7.	Goto the "Start" menu and choose to "Shut Down... ".  Pick the "Restart
	the computer?" option.  When the system restarts Win95 the installation
	will be complete.

8.	You will have the following device types and specific devices when
	viewing the Device Manager:

	"CD-ROM controllers" - "TEAC4x CD-ROM Drive w/8 bit MKE Interface Card"
	and
	"CDROM" - "TEAC CD-ROM CD-55A"


Contacting DIAMOND
------------------

Postal Service  : Diamond Multimedia Systems, Inc.
                  ATTN: Technical Support
                  2880 Junction Avenue
                  San Jose, CA  95134-1922
Voice (TechSupt): (408) 325-7100
Voice (Main)    : (408) 325-7000
FAX             : (408) 325-7171
BBS (to 14400)  : (408) 325-7080
BBS (to 28800)  : (408) 325-7175
CompuServe      : GO DIAMOND
America Online  : GO DIAMOND
MSN             : GOTO DIAMONDONLINE
WWW             : http://www.diamondmm.com
FTP             : ftp.diamondmm.com
Internet E-Mail : 75300.3673@compuserve.com

                                %% END %%
