        #
        | README file for
        |
        | ELSA LANCOM 1000 Office router, Rel. C
        |
	|	Firmware Release 1.01
	|
        | Copyright (c) 1994-98 ELSA AG, Aachen (Germany)
        |
        | ELSA AG                   Internet   : http://www.elsa.de
        | Sonnenweg 11              LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen            
        |
        | ELSA Inc.                 Internet   : http://www.elsa.com
        | 2231 Calle De Luna       
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.            Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5   
        | Nanking East Road
        | Taipei 105
        | Taiwan, R. O. C.
        |
        | ELSA Japan Inc.           Internet   : http://www.elsa.com
        | Mita Suzuki Building 3F   
        | 5-20-14 Shiba, Minato-ku
        | Tokyo 108-0014
        | Japan
        |
        | 05/07/98, MSahm



        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Important Notes 


--------------------------------------------------------------------

1.      Overview

        This disc contains the firmware for the
        ELSA LANCOM 1000 Office router.
        This router contains special Flash-ROM equipment which 
        enables you to load new and enhanced firmware into the 
        router.

--------------------------------------------------------------------

2.      Contents

        This disk contains the following files:

        LC_1000U.101  Firmware Rel. 1.01 for ELSA LANCOM 1000 Office
        LIESMICH.TXT  This file (german)
        README.TXT    This file (english)

--------------------------------------------------------------------

3.      Installation

	Basically there are several ways to load a new firmware
        into a LANCOM router. The easiest method is to use the
        ELSA LANconfig tool that is shipped with your LANCOM router. 
	You can simply start an	upload from the "Edit" menu or by 
        choosing the icon "Firmware-Upload" at the taskfield.

	The alternate method is to use a standard terminal 
        program with X-modem support.

        a.) Connect your LANCOM 1000 Office router with the
            serial connection cable in the package to a serial
            COM Port of your computer or laptop.

        b.) Install and start any available terminal program, which
            supports XMODEM file upload, for example the Telix 
            terminal program 3.51 which is shipped together with 
            your router.

        c.) Configure your terminal program for the selected 
            COM-Port and a bitrate up to 115200 bit/s. Login to the
            outband configuration of LANCOM 1000 Office

        d.) Enter the command "do /firmware/firmware-upload" or 
            "do /fi/fi" for short. After the confirming message the
            router is ready to upload the new firmware.

        e.) Start the XMODEM upload process with your terminal 
            program.

        f.) After terminating the upload process and automatic boot
            up your LANCOM 1000 Office will be ready to use the new
            firmware immediately.

--------------------------------------------------------------------

        4. Important Notes:

        The LANCOM 1000 Office firmware development is permanently
        in progress for better function and more features. We offer
        you the latest firmware release at our homepage. At

        http://www.elsa.com 

        youre able to download this release free of charge.


 