        #
        | README file for
        |
        | ELSA QuickStep 3000
        | Version 2.28            
        |
        | Copyright (c) 1993-98 ELSA AG, Aachen (Germany)
        |
        | ELSA AG                    Internet   : http://www.elsa.de
        | Sonnenweg 11               LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen             CompuServe : GO ELSA
        |
        | ELSA Inc.                  Internet   : http://www.elsa.com
        | 2231 Calle De Luna         CompuServe : GO ELSA
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.             Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5     CompuServe : GO ELSA
        | Nanking East Road
        | Taipei 105
        | Taiwan, R. O. C.
        |
        | 01/05/98



- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

        Table of Contents

        1.      Overview
        2.      Contents
        3.      Installation
        4.      Notes

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

1.      Overview:

        This file contains notes and changes to the
        ISDN drivers.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

2.      Contents:

        This directory contains the following files:

        README.TXT    this file
        LIESMICH.TXT  german version of this README.TXT

        ISDNMON.EXE   ELSA ISDNmonitor for DOS

2.1     Driver for CAPI 1.1 and 1TR6 (national ISDN):

        ISDNCAPI.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120

        ISDNCAPA.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             modem function (V.34), Fax group 3 function

        ISDNCAPX.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90
                             modem function (V.34), Fax group 3 function

               - - - - - - - - - - - - - - - - - - - - - - - -

2.2     Driver for CAPI 1.1 and DSS1 (EURO-ISDN):

        DSS1CAPI.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120

        DSS1CAPA.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             modem function (V.34), Fax group 3 function

        DSS1CAPX.EXE  CAPI version 1.1 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90
                             modem function (V.34), Fax group 3 function

               - - - - - - - - - - - - - - - - - - - - - - - -

2.3     Driver for CAPI 2.0 and 1TR6 (national ISDN):

        ISDNC20I.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent, X.75, V.120

        ISDNC20A.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             modem function (V.34), Fax group 3 function

        ISDNC20X.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : 1TR6 (national ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90
                             modem function (V.34), Fax group 3 function
               - - - - - - - - - - - - - - - - - - - - - - - -

2.4     Driver for CAPI 2.0 and DSS1 (EURO-ISDN):

        DSS1C20I.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent, X.75, V.120

        DSS1C20A.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             modem function (V.34), Fax group 3 function

        DSS1C20X.EXE  CAPI version 2.0 driver for ELSA QuickStep 3000
        D channel protocol : DSS1 (EURO-ISDN)
        B channel protocols: HDLC transparent, bit transparent,
                             X.75, T.70NL, V.120
                             ISO 8208 (X.25), T.90
                             modem function (V.34), Fax group 3 function
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

3.      Installation:

        The following illustration shows the mounting bracket of
        your ISDN plug and play adapter board :
                       _____
                       \    |
                        |   |
                        |___|
                        |___|<- ISDN line connector
                        |   |
                        | o |<- ISDN connection status display (yellow LED)
                        | o |<- ISDN interface status display (green LED)
                        |   |
                        |   |
                        |   |
                        |___|
                                          _
         ________________________________|
        |                                |
        |                               _|
        |                              |_ <- ISDN line connector
        |                                |
        |                                o<- yellow LED
        |                                o<- green LED
        |                                |
        |                                |
        |    _                      __   |
        |___| |____________________|  |__|


        The ISDN plug and play adapter board is full software-
        configurable and has NO jumper.

               - - - - - - - - - - - - - - - - - - - - - - - -

        a.) Installation with plug and play:

            If you system supports plug and play you just have to
            install the driver without any parameters.

               - - - - - - - - - - - - - - - - - - - - - - - -

        b.) Installation without plug and play:

            If your system don't supports plug and play, and you
            install the driver without any parameters, the driver
            uses the following defaults:

            I/O-address : 0x160h
            IRQ         : 15

            If this parameters are used by an other programm, you
            have to install the driver with the following
            parameters:

            <Drivername> [/aI/O-address] [/rIRQ]

            e.g.: ISDNCAPI /a160 /r12

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

4.      Notes:

        V.120 under CAPI 1.1 and CFOS (version newer than 07/15/96):

        Enter the following AT-command:

            AT B12 S17=1 S76=1

        Now, the ISDN adapter board tries to get a V.120 connection
        erverytime you dial "ATDn" (n = number)..

        If you want to get back to X.75 mode, you have to enter:

            AT&F

               - - - - - - - - - - - - - - - - - - - - - - - -

        Modemconnection under CAPI 1.1 and CFOS:

        Enter the following AT-command:

            AT B7

        Now, the ISDN adapter board tries to get an analog connection
        erverytime you dial "ATDn" (n = number)..

        For an automatically modemconnection acceptance you must enter
        the following AT-commands:

            AT &IA S44=1 S0=1


        If you want to get back to X.75 mode, you have to enter:

            AT&F

               - - - - - - - - - - - - - - - - - - - - - - - -

        V.120 under CAPI 2.0 and CFOS (version newer than 07/15/96):

        Enter the following AT-command:

            AT B12 S17=1 S76=1

        Now, the ISDN adapter board tries to get a V.120 connection
        erverytime you dial "ATDn" (n = number)..

        If you want to get back to X.75 mode, you have to enter:

            AT&F

               - - - - - - - - - - - - - - - - - - - - - - - -

        Modemconnection under CAPI 2.0 and CFOS:

        Enter the following AT-command:

            AT B7

        Now, the ISDN adapter board tries to get an analog connection
        erverytime you dial "ATDn" (n = number)..

        For an automatically modemconnection acceptance you must enter
        the following AT-commands:

            AT &IA S44=1 S0=1


        If you want to get back to X.75 mode, you have to enter:

            AT&F

               - - - - - - - - - - - - - - - - - - - - - - - -

        The latest information you will always find in the
        ELSA LocalWeb or on our homepage.

        Have fun with your ISDN board.
