        #
        | README file for
        |
        | 0820884.exe (Update-File for ELSA Communicate! Pro)
        |    
        | Copyright (c) 1995-98 ELSA AG, Aachen (Germany)
        |
        | ELSA AG	             Internet   : http://www.elsa.de
        | Sonnenweg 11               LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen             
        |
        | ELSA Inc.                  Internet   : http://www.elsa.com
        | 2231 Calle De Luna         
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.             Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5     
        | Nanking East Road
        | Taipeo 105
        | Taiwan, R. O. C.
	|
	| 08/27/98, ms


        Table of contents

        1.      Overview
        2.      Files Supplied
        3.      Installation


-----------------------------------------------------------------------

1.      Overview

        This file contains information about the update-file 
	ELSA Communicate! Pro.


-----------------------------------------------------------------------

2.      Files Supplied

        This directory contains the following files:

        LIESMICH.TXT       This file in German
        README.TXT         This file
	0820884.exe	   Update-File for ELSA Communicate! Pro  

-----------------------------------------------------------------------

3.      Installation

        This is a guide how to update ELSA Communicate! Pro.


	Update for ELSA Comunicate! Pro

	1) When installing ELSA Communicate! Pro, you should install to the 
	suggested direc-tory, i.e. 'x:\COMMPRO', where x stands for the 
	hard drive where the program is to be installed.

	2) To install ELSA Communicate! Pro you need at least 55 MB of 
	available space on the target drive. ELSA Communicate! Pro takes 
	up a minimum of 28 MB disk space.

	3) If you are prompted for the source path during the installation 
	of ELSA Communica-te! Pro, please enter 'y:\ELSACPRO', where y 
	stands for your CD-ROM drive letter.

	4) After the installation, the program '0820884.exe' on the 
	enclosed floppy disk must be started as described below. This 
	ensures that your ELSA Communicate! Pro is fully up to date.

	5) First, close all programs, most importantly ELSA Communicate! Pro!

	6) Insert the enclosed floppy disk into its disk drive, click on 
	Start E Run and type in 'a:\0820884.exe'. Click on OK.

	7) The updatewill be implemented after clicking on the Update button.

	8) If you have set the recording quality in the ELSA Configuration 
	Manager to 'high qua-lity', the length of recording time is 
	reduced to a minimum. ELSA recommends the 'normal quality' setting.


	Your ELSA Team

	No.: 20098/ 0898
        


-----------------------------------------------------------------------
