        #
        | README file for GAMMA.EXE, ver. 1.00
        |
        | Copyright (c) 1996-97 ELSA AG, Aachen (Germany)
        |
        | ELSA AG                    Internet   : http://www.elsa.de
        | Sonnenweg 11               LocalWeb   : +49-(0)241-938800
        | D-52070 Aachen             CompuServe : GO ELSA
        |
        | ELSA Inc.                  Internet   : http://www.elsa.com
        | 2231 Calle De Luna         CompuServe : GO ELSA
        | Santa Clara, CA 95054
        | USA
        |
        | ELSA Asia Inc.             Internet   : http://www.elsa.com
        | 7F-11, No. 188, Sec. 5     CompuServe : GO ELSA
        | Nanking East Road
        | Taipeo 105
        | Taiwan, R. O. C.
        |
        | 10/23/97, GBorgs


	Table of contents

        1.      Program desciption
	2.      Supported Graphics Boards
        3.      Using the tool GAMMA.EXE


------------------------------------------------------------------------

1.      Introduction

        The program GAMMA.EXE enables or disables the option to use
        the color lookup table at VESA BIOS graphics modes with 15, 16
        and 24bpp (bit per pixel). These modes are direct color modes.

        The first call of GAMMA.EXE enables the option. After a
        VESA BIOS direct color mode is initialised, you can change the
        displayed color via programming the color lookup table. Now the
        VESA-call "Return Super VGA mode information" returns "Color ramp
        programmable".

        To disable the gamma correction again, you have to call GAMMA.EXE
        a second time. Now the VESA-call "Return Super VGA mode
        information" will return "Color ramp fixed".


------------------------------------------------------------------------

2.      Supported Graphics Boards

	The following ELSA graphics boards are supported by the program
        GAMMA.EXE:

                WINNER 3000-M
                WINNER 3000-L


------------------------------------------------------------------------

3.      Using the tool GAMMA.EXE

        Command line syntax:       GAMMA

        Command line parameters:   The program does not support any command
                                   line parameters.
