	#
	| README file for 
	|
	| ELSA Flashtool FLASH_P
	|
        | Version: 1.29
        |
	| Copyright (c) 1993-98 ELSA AG, Aachen (Germany)
	|
	| ELSA AG                    Internet   : http://www.elsa.de
	| Sonnenweg 11               LocalWeb   : +49-(0)241-938800
	| D-52070 Aachen             
	|
	| ELSA Inc.                  Internet   : http://www.elsa.com
	| 2231 Calle De Luna         
	| Santa Clara, CA 95054
	| USA
	|
	| ELSA Asia Inc.             Internet   : http://www.elsa.com
	| 7F-11, No. 188, Sec. 5     
	| Nanking East Road
	| Taipei 105
	| Taiwan, R. O. C.
	| 
	| ELSA Japan Inc.            Internet   : http://www.elsa.com
	| Mita Suzuki Building 3F    
	| 5-20-14 Shiba, Minato-ku
	| Tokyo 108-0014
	| Japan
	|
	| 06/19/1998, GCopoix/FRauser


        Table Of Contents

        1.      Overview
        2.      Disk/CD Contents
        3.      Usage Notes
        4.      Release Notes
        5.      Notes & Warnings (!)


------------------------------------------------------------------------

1.      Overview

        FLASH_P.EXE is a utility to easily update the BIOS on an
        ELSA Permedia graphics board.

        You will find a list of supported ELSA graphics boards
        in section 4.1.


---------------------------------------------------------------------

2.      Disk/CD Contents

        The program disk/CD contains the following files:

        FLASH_P.EXE     the executable program
        DOS4GW.EXE      DOS extender used by FLASH_P.EXE
        README.TXT      this text file, including notes on the
                        current program release
        LIESMICH.TXT    German version of the text you are currently
                        reading
        IMAGES (DIR)    Subdirectory containing the BIOS images which
                        are used for update. You will find a list of
                        these images in section 4.1.


---------------------------------------------------------------------

3.      Usage Notes

3.1     Standard BIOS update

        If you want to update the BIOS on your ELSA Permedia graphics
        board just call FLASH_P.EXE from MS-DOS (or from an MS-DOS-
        compatible Operating System) by:

        FLASH_P.EXE

        The program will look for supported ELSA graphics boards.
        If the program will find one of the supported graphic boards
        in your computer, it will search for the correct BIOS image
        in the directory IMAGES.

        After confirmation the program will save your old BIOS to the
        file C:\OLD_xxxx.bin (xxxx is a number, i.e. C:\OLD_0000.bin,
        C:\OLD_0001.bin, ...) and program the new image to your
        ELSA graphics board.

        Notes:

        - If the BIOS currently installed on your ELSA graphics board
          is the same version than the BIOS in IMAGES, no update is
          done.

        - If the BIOS currently installed is older than the one in
          IMAGES, you will be asked if you really want to program
          an older BIOS version to your graphics board.
          If you confirm with 'y' your current BIOS will be saved to
          C:\OLD_xxxx.bin and the older image will be programmed
          to your ELSA graphics board.


3.2     Command Line Parameters


        FLASH_P.EXE [filename]

        It is possible to pass the filename of the BIOS image, you want
        to program to your graphics board to FLASH_P.EXE.
        If you i.e. pass the name of the saved image to FLASH_P.EXE it
        is possible to restore your saved BIOS version to your
        ELSA graphics board:

        FLASH_P.EXE C:\OLD_0000.BIN


---------------------------------------------------------------------

4.      Release Notes

4.1     Supported graphics boards

          ELSA GLoria-S
          ELSA GLoria Synergy PCI
          ELSA GLoria Synergy AGP
          ELSA WINNER 2000/Office PCI
          ELSA WINNER 2000/Office AGP
          ELSA GLoria-XXL

        The program FLASH_P.EXE will check if the BIOS image is valid
        and useable with your ELSA graphics board.


---------------------------------------------------------------------

5.      Notes & Warnings

5.1     Don't corrupt your BIOS!

        Please make sure that while programming a new BIOS to your
        ELSA graphics board you

        - don't reset,
        - don't switch off or
        - don't interrupt your computer in any way until it's finished!

        If you interrupt FLASH_P.EXE in any way before finishing your
        BIOS, you will corrupt the BIOS of your graphics board.
        In this case, please phone our support.

        Please wait, until FLASH_P.EXE has finished programming the new
        BIOS to your ELSA graphics board.
        The program FLASH_P.EXE will give you a note after it has
        successfully finished the bios programming.


5.2     Windows DOS-boxes, OS/2

        Please note that the program FLASH_P.EXE does not work in a
        Windows (3.x/95/NT) DOS-box or under OS/2.
        You have to boot an MS-DOS (or compatible) system and 
        start FLASH_P.EXE.
