
             //-------------------------------------------------//
             //       Mitsumi Mouse Driver User's Manual        //
             //-------------------------------------------------//


                                  ( Index )

                        1. Mouse Driver for DOS

                        1-1. Enabling the mouse driver
                        1-2. Mouse driver options
                        1-3. Installing the mouse driver
                        1-4. Mouse driver test program

                        2. List of Files Included in This Package

----------------------------------------------------------------------------

1. Mouse Driver for DOS

1-1. Enabling the mouse driver

   The following methods can be used to enable the Mitsumi Mouse Driver.
   For example, when the mouse Driver is installed in C:\MTMMOUSE.

   The path is set to C:\MTMMOUSE or current directory is C:\MTMMOUSE

      MOUSE [ENTER]

   If the path is not set, then type

      C:\MTMMOUSE\MOUSE  [ENTER]

   To execute the mouse driver from AUTOEXEC.BAT, add the line:

      C:\MTMMOUSE\MOUSE

   To execute the mouse driver from CONFIG.SYS, add the line:

      INSTALL=C:\MTMMOUSE\MOUSE.COM

1-2. Mouse driver options

    a) Run time options

       There are several run time options can be set at the command line
       when running the mouse driver. To enable these options, just
       append the command line switches after "MOUSE".

       (Example) You are using a PS/2 mouse and want to change the message
       to Japanese.

            MOUSE /P /L=JP [ENTER]

       (Example) You wish to slow down the cursor speed and switch the left
       and right button.

            MOUSE /S /E    [ENTER]

    b) List of run time options

        /OFF    : Dismount mouse driver from memory
        /P      : Use PS/2 mouse
        /B      : Search PS/2 and serial mouse
        /Cn     : Use Serial mouse on COMn (n=1-4)
        /N      : Set mouse cursor tracking speed to normal
        /Q      : Fast mouse cursor movement
        /S      : Slow mouse cursor movement
        /M=x,y  : Set cursor move speed (the necessary mickey value needed
                  to move 8 pixel)
        /E      : Switch mouse left and right button
        /F      : Reset the mouse buttons to the default state
        /L=lang : Message language
        /An     : Choose acceleration curve number (n=1-4)
        /R=n    : Set mouse orientation angle to n degree (n=0-359)
        /?      : See all options

    c) Options reference

        /OFF    Release mouse driver from memory to free conventional
                memory.

            > When the mouse driver is no longer needed, this option can be
              used to free conventional memory.

        /B      Search PS/2 and serial mouse.

            > This option looks for the mouse port in this order:
              PS/2 -> COM1 -> COM2 -> COM3 -> COM4

        /P      Use PS/2 mouse.

            > Use this option to enable a PS/2 mouse(when more than one
              mouse is connected to the system). When using this option,
              mouse devices on the other ports will not be scanned.

        /Cn     Use Serial mouse.

            > Use this option to enable only a serial mouse(when more than
              one mouse is connected to the system). But when using this
              option, mouse devices on the other ports will not be scanned.
              n is the port number(COM number)(1 - 4).

        /N      Set mouse cursor tracking speed to normal.

            >This option sets the speed of mouse cursor to normal.

        /Q      Set the mouse cursor tracking speed to fast.

            > Set the mouse cursor tracking speed to its maximum setting.

        /S      Set the mouse cursor tracking speed to slow.

            > Set the mouse cursor tracking speed to its minimum setting.

        /M=x,y  Set the mouse speed to a specific parameter.

            > Set the mouse cursor speed to the mickey number which is
              needed to move the mouse cursor 8 pixels.
              For x coordinate, the range of mickey value is from 8 to 255.
              The default is 8.
              For y coordinate, the range of mickey value is from 16 to 255.
              The default is 16.

        /E      Switch the left and right mouse buttons.

            > Use this option to switch the left and right mouse buttons.

        /F      Reset the mouse buttons to the default state.

            >This option resets mouse left/right buttons to the default
             state.

        /L=lang Change the message display language.

            > Use this option to select the message language. Substitute
              lang with the abbreviation of the language.
              The list of abbreviations and supported languages appear
              below:

                    GB  : English (Default)
                    F   : French
                    D   : German
                    E   : Spanish
                    I   : Italian
                    JP  : Japanese

        /An     Choose the acceleration curve number.

            > You can select one of the acceleration curves with this option.
              Please specify the acceleration curve number to n(1 through
              4).

        /R=n    Set the mouse orientation angle to n degree(n=0-359).

            > You can change the mouse orientation angle. Please specify an
              integer value from 0 to 359.

        /?      Display option list

            > This option will display a list of available options for the
              mouse driver.

1-3. Installing the mouse driver

   To install the mouse driver to the hard disk, please use the included
   installation program.
   To start the installation program, first insert the installation disk
   into A drive or B drive and then type the following:

        DOSINST  [ENTER]

   After the install program has started, there will be a menu with several
   options.

        The following is a list of options you can set at the menu:

            > Reboot After Install
                                - Reboot after installing mouse driver.

            > Add to PATH
                                - Add the mouse driver directory to PATH.

            > Startup Option(s)
                                - Set the options of mouse driver when
                                  starting from AUTOEXEC.BAT.

            > Install Directory
                                - To place mouse driver in specific
                                  directory.

            > Add to AUTOEXEC.BAT
                                - Modify AUTOEXEC.BAT so mouse driver is
                                  started every time at start up.

            **  Caution!! **  When there are files with the same name as
                              the files to be installed, the old files
                              will be over written.

                              Files to be installed.
                              MOUSE.COM  , INSTALL.EXE , DEMO.EXE ,
                              README.DOC , MANUAL.DOC


1-4. Mouse Driver Test Program

   You can test the left and right buttons (on/off) with the DEMO program
   included.

   To use the program, just type:

        DEMO    [ENTER]

   To end the program, press [ESC]. Have fun!


2. List of Files Included in This Package
    
    MOUSE.COM       Mouse driver for DOS
    DEMO.EXE        Demonstration program for DOS
    DOSINST.EXE     Installer for DOS
    README.TXT      README file
    MANUAL.TXT      Programmers reference for DOS
    EXPAND.EXE      File expanding utility program  *1

    *1 : EXPAND.EXE is a software product of Microsoft Corporation.

